& GT; Аб'ектыў колцавае злучэнне выкарыстоўваецца ў больш высокім ціску, чым 3000 фунтаў. & GT; Гэтыя пракладкі былі выкарыстаныя на трубавых фланцев ў сінтэзе лініі.
Len кольца Joint Gksket
Стыль KXT 840 аб'ектыў Ring Joint Пракладка
аб'ектыў RІНГАЎ Пракладка, таксама вядомая як шайбы з шаравой паверхняй, у асноўным выкарыстоўваюцца для злучэння труб высокага ціску, Асноўная функцыя
oflens кальцавая пракладка з'яўляецца ўшчыльненне, Металічныя пракладкі аб'ектыва ўключае ў сябе металічную плоскую пракладку, пракладку трохкутнай формы, падвойнае кальцо конусу, С-вобразнае кольца і тыпу C
пракладка,ring пракладка,serrated пракладка,wave gasket and hollow o-ring, etc,, ,
It is wide to use the lens ring gaskets to seal in the high pressure pipe connections, Seal faces of lens ring gaskets are ball surface, in
кантакт with conical sealing surface of the pipe, the initial state is in a loop, By the action of the preload force, lens ring gasket has a
пластычная дэфармацыяat the кантакт point and the loop is into a belt loop, which has the better sealing performance, The кантакт face is
натуральна, утвараецца сферычнаеsurface and beveled surface, so the gasket is easy for alignment, Lens ring gasket is the forced seal
gasket,
асноўны стыль
Асаблівасці
1,Lens ring gasketis applicable for the pipe seal that the pressure isn't lower than 10MPa,
2,Lens ring gasket is of line seal, large expansion and contraction, large compensation and easy compact,
3,Due to кантакт with flange cone face, easy to have the pressing mark, The interchangeability of part is poor,
4,Lens ring gasket is also pressure energized, as well as the double-cone gasket,
5,The hardness oflens ring gasketmust be15~20HB lower than the mating flange face hardness,
параметры прадукцыйнасці
каэфіцыент пракладкі |
m=5,50-6,50 |
пракладка з выкарыстаннем ціску |
= 32MPa |
пракладка з выкарыстаннем Тэмпаrature |
-196oC - 1000оС |
мінімальная папярэдняя зацяжка ціск |
y=126,6 - 182,8MPa |
Materials
Мяккае жалеза, нізкі C / S, ss410, SS304, SS316, ss347, F5, F11, медзь, алюміній, инконель 600, инконель 625, Инкола 800, Инкола 825,
Монель 400,Тытан, нікель 200, Hastelloy C276, Zirconium702
дадатак
The gaskets are primarily used in the oil, gas, petrochemical and offshore industries, They are also commonly used on valves,
труба працоўныя вузлыand vessel joints and are used to seal flanged connections subject to high pressures and temperatures,
тэхнічныя ўмовы
It can provide any standard and non-standard sizes, including the standards of API 6A, ASME B16,20, DIN 2693-67, JPI-7S-23-72,
DIN-2696-1999 іother standards,